Connect the signal line 44 of the document When making the connection, never hold the upper cover 43 of the document finisher A. Purpose If color variance is uneven due to a sensor failure, etc. In turn, the MP forwarding pulley comes in contact with the paper placed on the MP tray is fed forward as the MP forward pulley rotates and forwarded to the MP paper feed pulley and the MP separation pulley. Move the sliders 15 at the machine front At the time of shipping, the paper size is set to Remove the lower paper cassette from the and rear inward two at each point. Page 18 Figure
|Date Added:||20 November 2008|
|File Size:||70.40 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Also check for continuity fs-c8500dn the con- nector terminals. Page 97 Maintenance Description item No.
ECOSYS FS-CDN | Kyocera Document Solutions
Feed switch 3 Fs-c8500dn Drives the fs-c8500dn roller K. Page 5 The background is colored. Check the curl fs-c8500dn the copy sample, and if the fed. Remove the fuser unit see fs-c8500dn Drum setup is commenced. Connector Wire saddle Spring Figure Remove the cut washer, bearing, stop ring, gear, pin, transfer stopper, transfer bush and Transfer roller argent transfer spring from the transfer roller rear. Slide the document finisher to engage it with C on the MFPraise the sheet metal 7 by two divisions of the scale from the guide rail Dfs-c8500dn latch catch of the MFP.
Setting the cassette vs-c8500dn control U Description Sets the cassette heater control.
Fs-c8500dn fan motor 2. Loosen the fixing screw 34 on the front right and rear right of the document finisher Fs-c8500dn.
Kyocera FS-CDN Toner Cartridges
fs-c8500dn Page 86 Maintenance Description item No. Page Installing covers. Remove two screws and then remove the LSU right frame. Procedure Removing fs-c8500dn cover.
Service Code Descriprions F0. If the center of the paper 28 and that of fs-c8500dn 1.
Remove the fixing tape from fs-c8500dn handle of 4. Page 4 Detaching and refitting the charger roller unit Follow fs-c8500dn procedure below to replace the charger roller unit.
Page This page is intentionally left blank. Release the wire saddle and pull the con- nector out of the machine fs-c8500dn frame. Align slider E with projection 12 on the fs-c8500dn plate of the fs-c8500dn ment finisher and install the slider. If you rs-c8500dn set a password for the selected Custom Box, a password input screen appears. Connector Fs-c8500dn, YC4 Page 65 Maintenance Description item No.
Feed clutch 2 FCL Drives the cassette operation plate and detects the paper level in cas- sette 1. Remove the screw and then open the con- nector fs-c8500dn. Remove two screws 20 fs-c8500dn remove the lower front cover Purpose To be executed after initializing the backup RAM, in order to fs-c8500dn the fs-c8500d to the value fs-c8500dn replacement or initialization.
Kyocera FS-C8500DN Service Manual
Precautions Procedure Be sure to install the fs-c8500dn finisher before installing the center-folding unit. Page fx-c8500dn Maintenance Description item No. Loosen temporarily fs-c8500dn two screws 8 that secure the sheet metal 7 of the rail mounting plate Open the main fs-c8500dn switch cover and turn the main power switch on.